雨果

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.01.17 11:13:46 =~=~=~=~=~=~=~=~=~=~=~=

telnet (tiptopgp)

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.03.29 09:29:01 =~=~=~=~=~=~=~=~=~=~=~=

telnet (tiptopgp)

Symptom

A Predictive Failure Analysis (PFA) originates in the hard disk logic and indicates a hard disk requires immediate replacement to avoid an outage. When a hard disk drive PFA asserts, the operating system's device driver passes that assertion message on to be recorded in the operating system's hardware event logs, the AMM logging, the IMM logging, the CMM logging, and MegaRAID Storage Manager logging.

With the ServeRAID H1110 SAS/SATA Controller, the message "hard disk predictive failure" will be posted in the logs. The message will not contain any content on the PFAing hard drive identification or slot identification information so the user will not be able to determine where the asserting PFA disk is located.

(where IMM = Integrated Management Module, AMM = Advanced Management Module, CMM = Chassis Management Module, MSM MegaRAID Storage Manager

Applicable Systems

　電腦藍屏，相信對大家已經很習慣了。最近，有Win7系統的用戶，在使用電腦的過程中，也遇到了電腦藍屏的問題，並提示錯誤代碼為：0x0000007e。電腦出現藍屏問題應該怎麼去解決呢？下載小編就和大家說一下Win7電腦藍屏顯示代碼0x0000007e的解決方法。

　　步驟如下：

　　一、原因分析：為什麼

　　“0X0000007E”代碼指代什麼意思？0X0000007E代碼的意思是電腦中病毒了或是電腦內存條出現了問題。

　　電腦中病毒一般是影響電腦正常運行的病毒，需要對電腦進行查殺才行。

請進入IIS設定：開始→控制台→系統管理工具→IIS (Internet Information Service)

reference: https://sites.google.com/a/qtm.ks.edu.tw/qtm052-org/6-visualstudio2012/iis-bo-fangmp4she-ding

Using DiskGenius Software System Migration
With DiskGenius software, it is easy to migrate a system from one hard disk to another, or more commonly, from a hard disk to an SSD, USB flash drive, etc. The first step is to install the second hard disk, SSD, or USB flash drive on your computer.

First of all, you need to install the second hard disk, SSD or USB flash drive, etc. on your computer, then start the system and run the DiskGenius software. You should be able to see the second hard disk (or SSD, USB flash drive, etc.) in the DiskGenius software.

1. In the DiskGenius main menu, click the "Tools - System Migration" menu item, as shown below. 2:

使用DiskGenius軟體，可以方便地將系統從一個硬碟遷移到另外一個硬碟上，或者更常見的是將系統從硬碟遷移到SSD固態硬碟、U盤等。

首先， 需要將第二塊硬碟、SSD固態硬碟或U盤等，在電腦上安裝好，然後啟動系統，運行DiskGenius軟體。在DiskGenius軟體中，應該可以看到這第二塊硬碟（或SSD固態硬碟、U盤等）。

1. 在DiskGenius主功能表，點擊“工具 – 系統遷移”功能表項目，如下圖：

2. 選擇遷移系統的目標盤，然後點擊“確定”按鈕。目標磁片可以小於源磁片，但是目標磁片容量需大於源磁片的已用資料總量。

3. 對於支援UEFI的電腦，還可以直接指定系統遷移完成後，要不要更改系統的啟動項。 點擊“開始”按鈕，準備進行遷移。

一.請用 root 登入, 執行下列步驟                                                
 Step 1) #cp ed.top /usr/bin/ed.top;chmod 755 /usr/bin/ed.top
 Step 2) #cp env.top /etc/env.top;chmod 755 /etc/env.top
 Step 3) #將 profile.top 的內容 append to /etc/profile 檔尾
二.使用web方式(搭配apache web server)執行TIPTOP GP 須執行以下幾個步驟

Look at your boot image with the show version command from your normal operating mode (Full Cisco IOS image) to see if the boot image supports the enable secret command. If it does, remove the enable password. If the boot image does not support enable secret, note these caveats:

Use of an enable password can be unnecessary if you have physical security so no one can reload the device to the boot image.

If someone has physical access to the device, they can easily subvert the device security without a need to access the boot image.

If you set the enable password to the same as the enable secret, you have made the enable secret as prone to attack as the enable password.

If you set enable password to a different value because the boot image does not support enable secret, your router administrators must remember a new password that is used infrequently on ROMs that do not support the enable secret command. With a separate enable password, administrators need to remember the password when they force a downtime for a software upgrade, which is the only reason to log in to boot mode.

IPv4的私有IP定義在RFC 1918